This is a post I penned in 2010...but it's still relevant and interesting...I think... :-)
5W30? 10W40? Ever wondered what it meant? Even if you do know what it means… a few interesting facts may follow.
The 5W30 is a designation of the engine oil weight. To break down the information lets create a “formula”: “1st Number” “1st Letter” – “2nd Number”. The 1st Number and 1st Letter actually go together – the letter: W in our case indicates the temperature and the 1stNumber indicates the viscosity measured in centistokes (cSt). W means winter and would indicate that the temperature of the testing was 0 degrees C (32 degrees Farenheit). If there was no letter it would indicate that the temperature was 100 degrees C. Which is why the 2nd Number has no letter following it; It is the viscosity of the oil at 100 degrees C.
⁃
⁃ What exactly is viscosity? It’s basically how thick a fluid is. For example, compare water and molasses (at room temperature). Water is less viscous than molasses. Comparing these two fluids is a good example to compare the engine oil at two temperatures. Think of oil at 0 degrees C as molasses and oil at 100 degrees C as water; water would flow through the engine easier.
I’ve always taken for granted that there were 2 numbers and a letter for oils, but after doing a bit of research, I found that the 2 numbers actually means it’s a multi-weight oil that has had polymers added to it.
Engine Oil Numbers
No comments:
Post a Comment